M6 bayonet explained

M6 bayonet
Origin:United States
Type:Bayonet
Is Bladed:yes
Service:1961–present
Used By:US Military
Wars:
  • Vietnam War
Design Date:1944 for M4 bayonet
Manufacturer:
  • Aerial Cutlery Co.
  • Columbus Milpar and Mfg. Co.
  • Imperial Knife Co
Production Date:1961–1969
Variants:M7 bayonet
Length:11.75inches
Part Length:6.75inches
Blade Type:Spear Point
Sheath Type:M8 & M8A1

The M6 bayonet is a bayonet used by the U.S. military for the M14 rifle, it can also be used with the Mk 14 Enhanced Battle Rifle as well M39 Enhanced Marksman Rifle. It was introduced in 1957, at the same time as the rifle itself.[1] It is the only bayonet made for the M14.

Description

Like its predecessor, the M5 bayonet for the M1 Rifle, the M6 was intended to serve additional roles as a combat knife and utility knife. The basic blade design was like the M4, M5, and later M7 bayonets, based on the World War II designed M3 Trench Knife.[2] The overall length of the M6 is 11.75inches, with a blade 6.75inches long. Contractors who manufactured the M6 included Aerial Cutlery Co., Columbus Milpar and Mfg. Co. and Imperial Knife Co.The first of these contracts was fulfilled in 1961 and the last in 1969.

The M7 bayonet which succeeded the M6 bayonet was introduced in 1964 for the M16 rifle. The most notable differences between the two are the diameter of the muzzle rings, the shape of the handle, and the locking mechanism. The M6 has a spring-loaded lever near the guard which when depressed releases the bayonet, and the M7's release mechanism is on the pommel. Both models are the same length, have the same black finish, and use the M8A1 sheath.

Today, the M6 is mainly used for ceremonial purposes, particularly by the Army and Marine Corps, both of which still use the M14 rifle for exhibition drill.[1]

1Screws
2Left Grip (Plastic)
3Right Grip (Plastic)
4Pin for Mount Lock-Release Latch (#5)
5Mount Lock-Release Latch
6Spring for Mount Lock-Release Latch (#5)
7Blade Assembly

M8 and M8A1 Scabbard

There are two variations of this scabbard, both with an olive drab fiberglass body with steel throat. The early version M8 scabbard only a had a belt loop and lacked the double hook that earlier bayonet scabbards had for attaching to load carrying equipment such as the M1910 Haversack. The improved M8A1 scabbard manufactured later in WW II has the M1910 bent wire hook. The scabbard throat flange is stamped "US M8" or "US M8A1" on the flat steel part along with manufacturer initials. Some M8 scabbards were later modified by adding the M1910 hook. Later M8A1 scabbards were manufactured with a modified extended tab on the web hanger to provide more clearance for the M5 bayonet which rubbed against the wider bayonet handle.[3] This sheath is correct for all post-war US bayonets including the M4, M5, M6, and M7. It was also used with the M3 fighting knife.

See also

External links

Notes and References

  1. Book: Brayley, Martin . Bayonets: An Illustrated History . 2004 . 234 . Krause Publications . 978-0-87349-870-8 .
  2. Book: Lewis, Jack. Jack Lewis (screenwriter)

    . The Gun Digest Book of Assault Weapons. Jack Lewis (screenwriter). 221–222. Krause Publications. 978-0-89689-498-3. 2007.

  3. Web site: Notes on the M8A1 Scabbard . Cunningham . Gary . April 2004 . Bayonet Points . 2024-08-05.