Square–cube law explained

The square–cube law (or cube–square law) is a mathematical principle, applied in a variety of scientific fields, which describes the relationship between the volume and the surface area as a shape's size increases or decreases. It was first described in 1638 by Galileo Galilei in his Two New Sciences as the "...ratio of two volumes is greater than the ratio of their surfaces".[1]

This principle states that, as a shape grows in size, its volume grows faster than its surface area. When applied to the real world, this principle has many implications which are important in fields ranging from mechanical engineering to biomechanics. It helps explain phenomena including why large mammals like elephants have a harder time cooling themselves than small ones like mice, and why building taller and taller skyscrapers is increasingly difficult.

Description

The square–cube law can be stated as follows:

Represented mathematically:[2] A_2=A_1\left(\frac\right)^2where

A1

is the original surface area and

A2

is the new surface area.V_2=V_1\left(\frac\right)^3where

V1

is the original volume,

V2

is the new volume,

\ell1

is the original length and

\ell2

is the new length.

For example, a cube with a side length of 1 meter has a surface area of 6 m2 and a volume of 1 m3. If the sides of the cube were multiplied by 2, its surface area would be multiplied by the square of 2 and become 24 m2. Its volume would be multiplied by the cube of 2 and become 8 m3.

The original cube (1 m sides) has a surface area to volume ratio of 6:1. The larger (2 m sides) cube has a surface area to volume ratio of (24/8) 3:1. As the dimensions increase, the volume will continue to grow faster than the surface area. Thus the square–cube law. This principle applies to all solids.[3]

Applications

Engineering

When a physical object maintains the same density and is scaled up, its volume and mass are increased by the cube of the multiplier while its surface area increases only by the square of the same multiplier. This would mean that when the larger version of the object is accelerated at the same rate as the original, more pressure would be exerted on the surface of the larger object.

Consider a simple example of a body of mass

m

, undergoing an acceleration

a

, with a surface area

A

, upon which the accelerating force is acting. The force due to acceleration is

F=ma

and the pressure is

P=

F
A

=

ma
A
.

Now, consider the object to be exaggerated by a multiplier factor

x

so that it has a new mass

m'=x3m

, and a new surface area

A'=x2A

.

The new force due to acceleration is

F'=x3ma

and the resulting pressure is:\beginP' &= \frac\\ &= \frac\\ &= x\ \frac\\ &= x\ P\\\end

Thus, just scaling up the size of an object, keeping the same material of construction (density), and same acceleration, would increase the pressure by the same scaling factor. This would indicate that the object would have less ability to resist stress and would be more prone to collapse while accelerating.

This is why large vehicles perform poorly in crash tests and why there are theorized limits as to how high buildings can be built. Similarly, the larger an object is, the less other objects would resist its motion, causing its deceleration.

Engineering examples

Biomechanics

If an animal were isometrically scaled up by a considerable amount, its relative muscular strength would be severely reduced, since the cross-section of its muscles would increase by the square of the scaling factor while its mass would increase by the cube of the scaling factor. As a result of this, cardiovascular and respiratory functions would be severely burdened.

In the case of flying animals, the wing loading would be increased if they were isometrically scaled up, and they would therefore have to fly faster to gain the same amount of lift. Air resistance per unit mass is also higher for smaller animals (reducing terminal velocity) which is why a small animal like an ant cannot be seriously injured from impact with the ground after being dropped from any height.

As stated by J. B. S. Haldane, large animals do not look like small animals: an elephant cannot be mistaken for a mouse scaled up in size. This is due to allometric scaling: the bones of an elephant are necessarily proportionately much larger than the bones of a mouse because they must carry proportionately higher weight. Haldane illustrates this in his seminal 1928 essay On Being the Right Size in referring to allegorical giants: "...consider a man 60 feet high...Giant Pope and Giant Pagan in the illustrated Pilgrim's Progress: ...These monsters...weighed 1000 times as much as [a normal human]. Every square inch of a giant bone had to support 10 times the weight borne by a square inch of human bone. As the average human thigh-bone breaks under about 10 times the human weight, Pope and Pagan would have broken their thighs every time they took a step."[5] Consequently, most animals show allometric scaling with increased size, both among species and within a species. The giant creatures seen in monster movies (e.g., Godzilla, King Kong, and Them!, and other kaiju) are also unrealistic, given that their sheer size would force them to collapse.

However, the buoyancy of water negates to some extent the effects of gravity. Therefore, aquatic animals can grow to very large sizes without the same musculoskeletal structures that would be required of similarly sized terrestrial animals, and it is the primary reason that the largest animals to ever exist on earth are aquatic animals.

The metabolic rate of animals scales with a mathematical principle named quarter-power scaling[6] according to the metabolic theory of ecology.

Mass and heat transfer

Mass transfer, such as diffusion to smaller objects such as living cells is faster than diffusion to larger objects such as entire animals. Thus, in chemical processes that take place on a surface – rather than in the bulk – finer-divided material is more active. For example, the activity of a heterogeneous catalyst is higher when it is divided into finer particles. Such catalysts typically occur in warmer conditions.

Heat production from a chemical process scales with the cube of the linear dimension (height, width) of the vessel, but the vessel surface area scales with only the square of the linear dimension. Consequently, larger vessels are much more difficult to cool. Also, large-scale piping for transferring hot fluids is difficult to simulate on a small scale, because heat is transferred faster out from smaller pipes. Failure to take this into account in process design may lead to catastrophic thermal runaway.

See also

Notes and References

  1. Book: How Mechanics Shaped the Modern World. David H. Allen. 24 September 2013 . Springer . 9783319017013.
  2. Web site: World Builders: The Sizes of Living Things. world-builders.org. 2012-04-21. 2016-10-23. https://web.archive.org/web/20161023115525/http://www.world-builders.org/lessons/less/les9/area.html. dead.
  3. Web site: The Biology of B-Movie Monsters. Michael C. LaBarbera.
  4. Book: The Most Powerful Idea in the World: A Story of Steam, Industry, and Invention . Rosen . William . 2012 . University of Chicago Press . 978-0226726342 . 98 .
  5. Web site: Haldane. J. B. S.. On Being the Right Size. Internet Research Lab. UCLA. 1 April 2017. 22 August 2011. https://web.archive.org/web/20110822151104/http://irl.cs.ucla.edu/papers/right-size.html. dead.
  6. Web site: Of Mice and Elephants: A Matter of Scale. George Johnson . The New York Times. January 12, 1999. 2015-06-11.